The Original and best since 1975.
KD6015
Product Overview
C820 Frequency controller
The KD60 Series utilize the C820 frequency controller. The C820 operates with an acceleration sensor in the drive to determine the optimum operating frequency for ease of operation and assures constant vibration, independent of the load or amount of tablets. The LCD screen allows the operator to turn the machine on and off, and to chose the necessary conveying speed to operate with the tablet press. The C820 remote operation feature allows for connection and operation through the tablet press controls if so equipped.
KRÄMER PATENTED VIBRATORY DRIVE SYSTEM
The KD60 Series vibratory drive features the Krämer patented counterweight system which allows for operation of the deduster with no vibration being transmitted to up stream or down stream equipment. Because of the counterweight the machine is extremely quiet, low maintenance and allows for precise vibration control which is extremely gentle on the tablets. The silicone membrane prevents dust from entering the vibratory drive unit.
TABLET INLET OPTIONS
The optional tablet inlet adapter connection to the tablet press and upstream equipment with the use of a rectangular tablet inlet 110×70 mm. If the adapter is not being used, a hose can directly be attached to the round Ø 60 mm inlet. The inlet can be rotated 360° independent of the outlet. The deduster is easily adjustable to various tablet press discharge configurations.
Utility Connection Ports
All Krämer dedusters feature a 2 inch Tri-Clamp vacuum dust collection port for ease of assembly of a dust collection hose. Various optional hose adaptors are available upon request. In addition, the power supply cable uses a quick connect plug. The quick connect plug allows for use of preassembled cables with power supply as well as signal wire options for communication to upstream equipment such as tablet presses.
Optimal Process Viewing
The KD60 Series features a PETG lift off window for optimal process viewing and ease of access to the helix for easy removal for cleaning. In addition, dust agitation compressed air nozzles are supplied for the cleanest tablets possible.
Ease of assembly and Disassembly
No tools are needed to assemble or disassemble the machine for cleaning. All product contact surfaces are 316L stainless steel. All Krämer machines minimize the number of parts to be cleaned, and keep the weight of each part minimal for ease of handling.
-
- Upward conveying heights 250 to 750 mm
- Improved dedusting and deburring capabilities thanks to optimized combination of vibration, dust agitation, air and vacuum suction
- Featuring an acceleration sensor that assures constant vibration, independent of the load / amount of tablets in the deduster
- Very high conveying capacity
- Optimum viewing of tablet movement with removable window
- Easy height adjustment, full 360° freedom of rotation at tablet inlet
- Vibration-free housing, patented drive unit
- Compact design, minimum footprint
- Easy assembly and disassembly, no tools are needed
- Easy to clean
Conveying height
Available Metal Detectors
250–750mm
Ceia, Lock, Safeline
-
KD7015A
Product Overview
Tablet inlet Options
The optional tablet inlet adapter connection to the tablet press and upstream equipment with the use of a rectangular tablet inlet 110×70 mm. If the adapter is not being used, a hose can directly be attached to the Tri-Clamp inlet. The inlet can be rotated 360° independent of the outlet. With the use of optional inlet adapters, the deduster is easily adjustable to various tablet press discharge configurations.
WINDOW FOR EASY VIEWING
The KD7015A and KD7035A dedusters feature a PETG dust tight, hinged, lift off window for easy viewing. The window is gasketed for dust tightness to meet OEB3 and OEB 4 hazardous dust requirements. The window allows easy access to interior of the machine for cleaning disassembly without removing the housing.
Touch screen operator panel
The KD70A Series combined units utilize the KC7070A touch screen controller that allows full control of the deduster, metal detector and diverter if used from the single touchscreen. The KC7070A controller operates with an acceleration sensor in the drive to determine the optimum operating frequency for ease of operation . It also displays the deduster, and metal detector standard operating settings and parameters in one location for ease of operation. It ensures also full compliance with 21 CFR Part 11, including user login, recipe- and user-management, audit trails for alarms and full logs during operation. A strong and durable transparent cover protects the touchscreen against falling objects or scratches.
Utility Connection Ports
All Krämer dedusters feature a 2 inch Tri-Clamp vacuum dust collection port for ease of assembly of a dust collection hose. The height adjustment of the KD7015A and KD7035A dedusters are enclosed in the drive base housing along with all wiring for a clean arrangement. The base contains a lockable gas strut which allows easy vertical adjustment of the deduster to meet the press outlet height. All wiring is enclosed in the base for an uncluttered look and ease of cleaning. In addition, the power supply cable uses a quick connect plug. The quick connect plug allows for use of preassembled cables for power supply as well as signal wire options.
KC7070A – A Smart Control System
The KD7015A and KD7035A dedusters feature the new KC7070A controller with optional OPC UA machine to machine interface. This new communication protocol, between tablet press and deduster, makes it possible to exchange machine alarms, states and various dedusters functions over TCP/IP. The integrated VNC server allows remote access diagnostics from anywhere for trouble free support to minimize unscheduled downtime. This smart connect product is Industry 4.0 ready.
Dust tight seal membrane
The KD7015A and KD7035A deduster drives are protected from dust by a silicone membrane held down with a bolt down flange seal. The seal membrane protects all of the drive mechanical and electrical components from dust intrusion allowing for long trouble free operation and ease of maintenance.
Containment and ATEX Performance
The KD7010 and KD7030 dedusters have been independently tested and certified to meet OEB 3 and OEB 4 containment levels in accordance with ISPE – SMEPAC requirements as well as the EC Machinery Directive 2006/42/EC and Directive 94/9/EC (ATEX-95).
Dust collection Air flow sensor
The dust collection air flow sensor, an option on both models KD7015A and KD7035A, allows for monitoring the dust collection suction for confirmation that suction is correct. If suction is lost or not in the proper range an alarm will be triggered.
-
- Upward conveying range of 250 to 1500 mm
- Control of deduster, metal detector and diverter with one touch-screen
- Dust-tight window
- Quiet operation < 68 dB acoustic measurements
- Featuring an acceleration sensor that assures constant vibration, independent of the load / amount of tablets in the deduster
- Optimum viewing of tablet movement with pivoting and fully removable window
- Easy height adjustment, full 360° freedom of rotation at tablet inlet
- Vibration-free housing, patented drive unit
- Compact design, minimum footprint
- Easy assembly and disassembly, no tools are needed
- Easy to clean
- Classification: Atex Zone II 2D/- Db 140 °C
- Certification: OEB4 (1 μg/m³ to < 10 μg/m³) acc. SMEPAC
- Optional, HEPA filter M-class
Conveying heights
Available Metal Detectors
250–1500mm
Ceia and Lock
-
2-Way diverter -
